Shipping of Walkers and Velopeds will be done by courier and service will not be affected by the Canada Post strike. · 
Manual: Replacement of Trionic Walker Backrest Strap
1 Unscrew the screw that holds the strap with a 3mm allen key.
Repeat on the opposite side.
2 Make sure that you recover the screw, the nut and the tubular spacer.
.
3 Pull the strap tight and turn the nut clockwise to tighten the strap.
.
4 Remove the main strap from the backrest padding.
.
5 Insert the new replacement strap into the padding.
IMPORTANT: Make sure to align the end of the strap with the TRIONIC logo as shown in the photo.
6 Insert the tubular spacer into the hole at the end of the strap.
.
7 Attach the backrest strap to the backrest clamp with the screw and the nut.
.
8 Attach the opposite end of the backrest in the same way.
IMPORTANT: Make sure that you can flip the backrest 90 degrees upwards for unfolding the Walker.
