Receive our product catalogue free of charge!
Please click the button to order our free product catalogue.
Hello! How can we help you?
My brake is worn out, how do I change it?
If the brake pads on the brakes on your Veloped/Walker get worn out, you will need to replace the brakes in order to ensure a proper brake function.
Just follow these simple steps:
Step 1. Detach the rear wheel.
Step 2. On the inside of the brake, unscrew and remove the 3 screws with a Phillips screwdriver and then remove the black plastic brake cover.
Step 3. Compress the brake and you can “unhook” and remove the brake cable from the brake, through the 2 cable slots.
Step 4. Unscrew and remove the screw that holds the brake with a 4mm Allen key.
Step 5. Attach the new brake with the 4mm Allen key.
Step 6. Push the cable adjuster screw into the brake, align its nut, and pull the brake cable end through the slot of the brake and attach it.
Step 7. Attach the black plastic cover with the 3 screws (Phillips screwdriver).
Step 8. Attach the wheel and test the brake.
Step 9. If the brake tension needs to be adjusted, please see separate instructions for this.
Glad we could help. Thanks for your feedback!
Please give us feedback or ask us over:
- 1-855-895-6635
- Chat with us
Or share your feedback directly:
Read and discover more about our premium quality rollators
Want to deepen your knowledge further? Below you will find everything you need to learn all about our Veloped and Walker rollators